Cotic Solaris test ride

As i said in the previous blog post, the guys at bache brothers cycles let me take their test Cotic Solaris home to play with. as well as the wednesday night ride I used it to commute to work and then out again on the same day for another ride before returning it, all in all i pedalled it just under 50 miles.
The frame is original spec (an uprated version is due August 2015) with predominantly 853 steel tubes with a tapered fork compatible head tube, loads of stand over room and in a lovely green colour. the top tube is ovalised, presumably for stiffness but regardless of it’s purpose it looks great and some how entices you to run your fingers along it as if to prove that your eyes aren’t deceiving you. I have to say that this frame is a size smaller than I’d normally ride but with a 90mm stem and a lot of seat post showing it was fine for the short distances I was riding it.
the ride was comfy, as as good steel frame usually is, as i mentioned in my previous post I had to get used to the very different technique of riding thin tyres and a suspension fork, by the end of the test period i had adjusted and was weighting the fork a lot more into corners and not getting freaked out when looking down at the front tyre and seeing what looked like a road tyre in comparison to a fatty front!
I must mention the wheels, although i’m only interested in how the frame performed the wheels do have a large bearing on the feel. these were Stan’s ztr crest rims on hope hubs. the hubs were as usual with Hope, pretty faultless but the rims were the flexiest things I’ve every ridden. they could be flexed visibly just by standing next to the bike, applying a brake and twisting the bars! very twangy! they maybe light but I wouldn’t spec them on anything but a XC race bike.
I’m interested in a Solaris frame as it has shorter chainstays than my current bikes so should be easier to lift the front wheel for manuals etc and the new version will easily take the new 27.5+ wheel and tyre standard as well as 29″, it will also take a longer suspension fork. the new one will also have a slightly slacker head angle, not that the present frame was unstable. In fact it felt pretty agile, was easy to wheelie and up steep climbs the front didn’t lift even in the lowest gear. It’s no lightweight but I didn’t notice any significant penalty on uphill gradients that weren’t outweighed by it’s ability to turn my pedalling into forward motion.
Add the wheel size versatility and new angles to the next version, add 1×11 shimano gearing and some trail friendly parts including a dropper post and I’d but pretty much what I’m looking for. the chaps at Bache brothers are getting a new version in as a demo and have said they’ll contact me when it arrives. hopefully it’ll be a size bigger but I’m excited to try it
ride 94
14 miles
total 1673
commute 349

3 thoughts on “Cotic Solaris test ride”

  1. Just a couple of things I hope you don't mind me mentioning. Both the Mk1 and Mk2 can take the 27.5+ wheels.Also the new frame is rated for 100 or 120mm forks whereas the older frame was slightly steeper but could take from 80 – 120mm forks.Thanks for the write up. Very interesting.


  2. yes, I am aware of the the new frame's angles, this current frame will take 27.5+ wheels but only really a 2.8″ tyre (which in reality is smaller than that) which doesn't really “future proof” it for when decent tyres become available. I'd also be running 130mm forks on it, as i already have a pair!


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: